EMT Practice Test

1. Question Content...

---

Question1: A customer needs a low cost block storage array for targeted workloads. The array needs to provide automated tiering, thin provisioning, and snapshot capabilities.
Which HPE storage solution meets the customer requirements?

Question2: A solution Integrator is installing new equipment to the rack Click the recommended location area for R3000 Gen5 UPS.

Question3: Drag the correct protocols from the left to their appropriate area on the topology.

Question4: You are upgrading firmware on two SN6000 switches in a fabric with a CLI connection. You did not wait for the upgrade to be activated on the first switch before beginning to install the firmware on the second switch.
What must you do to install the firmware on the second switch?

Question5: Refer to the exhibit.

A customer is planning to deploy a branch office server rack
What should you change in your configuration to ensure it meets the customer requirements?

Question6: A customer with a Microsoft server environment wants to consolidate their employee home directories and other company file shares presented from an appliance as a single name space.
Which HPE product should you recommend to the customer?

Question7: Match the HPE Tool with its use case. Select all that apply.

Question8: What does the term composable mean when applied to HPE infrastructure?

Question9: you are designing a system for a customer that runs an OLTP application. The customer has SAN based storage. They need to accelerate application performance.
Which HPE ProLiant Gen10 feature set will address this customer's needs?

Question10: Place the components on the left in the correct order on the right for the recommended power-up sequence.

Question11: Why is SNMPv2c considered to be insecure?

Question12: Refer to the exhibit.

A customer purchased a server/storage environment shown in the exhibit with 1 Gb networking connectivity.
The customer is now experiencing performance issues.
Identify the correct components to upgade the network connections and improve performance on the left. Then drag those components to the answer area on the right. (Choose three.)

Question13: A customer needs a virtual desktop infrastructure environment to quickly deploy new desktop images to more than 70 onsite contractors. They plan to use HPE ProLiant DL360 Gen10 servers running VMware ESXi connected to a shared storage device. The customer requires deduplication because they are concerned about the required storage capacity for the full clone images.
Which storage device would best address their concerns?

Question14: Match the characteristic to the correct HPE ProLiant family.

Question15: You need to create a dynamic bridge-aggregation group on a FlexFabric switch to ensure the ports are automatically configured with the applicable bridge-aggregation interface configuration Drag the steps on the left Into their appropriate order in the answer area on the right.

Question16: Which HPE solution brings together CPU, Memory, and Disk with an unpredictable workload into a single management infrastructure?

Question17: Refer to the exhibit.
Drag the correct protocols from the left to the appropriate area on the topology on the right.

Question18: Match each characteristic to the appropriate RAID level.

Question19: An administrator deployed a new FlexFabric switch Into the environment and wants to collect baseline information from the switch The administrator wants to be able to use this in case there is any question from support should the administrator open a case.
Which command can the administrator use to collect support information from the switch?

Question20: Match each customer data center architecture to its network topology.

Question21: Match each HPE solution to its corresponding technology usage.

Question22: You are reviewing a series of MSA2052 storage designs for a customer's remote locations. Their largest
remote site requires the highest possible level of internal data protection with at least 20 TB of storage. Which disk drive design is adequate for this site?

Question23: What is a benefit of a NAS device?

Question24: A system administrator is performing the BIOS/Platform configuration of a DL380 Gen10 servers You notice the amber health LED.
The health status of which solution components can be verified with embedded UEFI Diagnostics? {Select two.)

Question25: A customer wants to optimize the performance of its storage array by moving data residing in one class of disks to a more appropriate class of disks based on data access patterns without manual intervention.
Which HPE storage technology/feature will meet the customer requirement when the data is stored on an HPE Primera storage?

Question26: Drag the correct protocols from the left to their appropriate area on the topology.

Question27: A customer needs to consolidate software, hardware, and backup in a single integrated solution to reduce the cost and complexity of their IT environment Which solution meets the customer needs?

Question28: A customer has the following requirements:
* two or more 10Gb SFP+ uplinks
* downlink ports capable of 1Gb or 10Gb operation over CAT6a or CAT7 cables.
* 24 downlink ports
Which HPE tool would you use to help choose an HPE network solution that meets the customer requirements?

Question29: Match the speed and protocol with the appropriate component.

Question30: What is the correct cable type to use when connecting a pair of switches using Long Range (LR) Transceivers?

Question31: Which feature in a block storage array is effective in decreasing the size of blocks?

Question32: Match the Networking Product Family to the appropriate use case:

Question33: A customer is expanding from local storage to a SAN environment for the firt time. They plan to future proof their environment with a 16 Gb Fibre Channel. They also want to allow for future I/O expansion with new servers.
Identify the correct server and storage to meet the customer requirements.

Question34: A customer is considering an upgrade of their networking infrastructure with HPE FlexFabric 5940 series switch.
Match the fan tray option with the airflow direction.

Question35: A customer with limited IT administration resources needs a complete HPE server, storage, and networking solution. The solution must be able to be deployed in an hour or less through a simple, wizard-based setup. They want to manage the HPE solution through a simple, integrated plug-in to vCenter, since their IT staff members are already familiar with vCenter.
Which HPE solution best meets the customer requirements?

Question36: You are installing a DL385 GEN10 LFF server at a customer site. The customer has a P8i6i-a RAID controller in the host After installing the provided 8 LFF disks in the front drive Days, you realize that the order also included two more SFF drives for the OS to boot from, but there are no SFF drive slots in the server, because it shipped from the factory.
Which action must be performed to finish the installation?

Question37: A customer needs NFS access on a fiber channel array.
What must be included in the solution to meet this requirement?

Question38: A client complains about systems reliability issues caused by their staff's inability to identify the root cause of failures. The client's lead administrator wants to automatically send data from HPE OneView to additional listeners in the network.
What should you configure in HPE OneView to enable the external monitoring of the managed devices?

Question39: A customer needs to add storage capacity to a host In a remote branch office. They have limited IT resources, so the solution requires ease of integration at a low price point Which HPE Storage family best meets these needs?

Question40: Refer to the exhibit.

An administrator connected a hypervisor to interface Ten-GigabitEthernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. VLAN 10 is configured to be tagged, and VLAN
20 is configured to be untagged on the hypervisor.
The administrator found that all the virtual machines in VLAN 20 can communicate with each other, but not with any virtual machines on VLAN 20 external to the hypervisor.
Given the output in the exhibit, what should you do to resolve the issue?

Question41: HPE Support asks you to generate an SSD wear gauge report for local storage on an HPE DL360 Gen10 server running VMware.
Which procedure will ensure that the server will boot directly into a maintenance state so you can generate the requested report?

Question42: Match each characteristic to the appropriate RAID level.

Question43: ou are designing a system for a customer that runs an OLTP application. The customer has SAN based storage.
They need to accelerate application performance.
Which HPE ProLiant Gen10 feature set will address this customer's needs?

Question44: A customer is subject to regulatory requirements and their data is highly sensitive.
Which HPE Smart Array feature addresses their need for an additional level of security for data stored inside their server?

Question45: Match the storage technology to the storage type.

Question46: A customer has two HPE ProLiant Gen10 servers. They both require firmware installation.
Which HPE tool should you recommend for performing this task?

Question47: Match the industry trend with its use case.

Question48: A customer just purchased a ProLiant 300 series Gen10 server and wants to install the latest version of Windows.
Which feature of this server will assist the customer with the initial Windows installation?

Question49: Match the HPE Tool with its use case. Select all that apply.

Question50: You are configuring an internal Smart Array controller on an HPE ProLiant server.
Which statement is true regarding the drives in the logical array?

Question51: Drag the correct protocols from the left to their appropriate area on the topology.

Question52: A customer needs the devices in their non-secure network to communicate in a secure manner. They are considering implementing Kerberos network authentication in their environment.
Which impact will this have when using iLO 5 with their HPE ProLiant Gen10 servers?

Question53: A customer needs to replace an existing storage array. The new array must be suitable for remote office deployment and support the following:
Multi-protocol connectivity
Flash-accelerated storage
Low-cost midline SAS drives
Which HPE storage platform will meet these requirements?

Question54: A customer is expanding from local storage to a SAN environment for the firt time. They plan to future proof their environment with a 16 Gb Fibre Channel. They also want to allow for future I/O expansion with new servers.
Identify the correct server and storage to meet the customer requirements.

Question55: A customer is expanding from local storage to a SAN environment for the firt time. They plan to future proof their environment with a 16 Gb Fibre Channel. They also want to allow for future I/O expansion with new servers.
Identify the correct server and storage to meet the customer requirements.

Question56: When is it appropriate for a customer to implement HPE OneView Standard?

Question57: Match the Networking Product Family to the appropriate use case:

Question58: You are installing a rack at customer site.
How can you ensure redundant power to the rack?

Question59: A customer needs a new environment to support an ERP system. The sizing information you received shows the following requirements:
* 3 servers with dual AMD processors, 256GB RAM, and 10Gb network connectivity
* 10TB of high performance shared storage
* Cloud-based performance monitoring and analytics
The customer prefers rack mounted equipment.
Identify the components that will meet the customer requirements, then drag the correct components on the left to their appropriate location in the environment on the right.

Question60: Match the HPE Tool with its use case. Select all that apply.

Question61: Match the characteristic to the correct HPE ProLiant family.

Question62: You are managing a HPE ProLinat rack-mount server and need to determine when the Remote Console was most recently used.
Where can you find this information?

Question63: You have configured a port on an HPE FlexFabric 5900 series switch that is connected to a VMware ESXi server to support multiple VLANs.

Given the configuration above, what should happen to any of the untagged traffic coming from the VMware ESXi host?

Question64: You are installing a combined server and storage solution at a customer location. What must you keep in mind regarding the typical requirements for the location? (Choose two.)

Question65: Match each characteristic to the correct storage type.

Question66: A customer considers a new HPE ProLiant DL380 Gen10 as a hardware platform for their application and requires maximum physical security.
For each security-related server components, identify whether it needs to be ordered separately, or whether it is included as part of the server solution.

Question67: A customer just purchased a ProLiant 300 series Gen10 server and wants to install the latest version of Windows.
Which feature of this server will assist the customer with the initial Windows installation?

Question68: A customer needs a virtual desktop infrastructure environment to quickly deploy new desktop images to more than 70 onsite contractors. They plan to use HPE ProLiant DL360 Gen10 servers running VMware ESXi connected to a shared storage device. The customer requires deduplication because they are concerned about the required storage capacity for the full clone images.
Which storage device would best address their concerns?

Question69: Which protocol verifies that the ports in common between two switches have compatible settings and removes the likelihood of a misconfigured aggregated link?

Question70: Indicate whether each management feature manages or monitors a single system or multiple systems.

Question71: A customer is experiencing read cache hit ratios well below 80 percent on an HPE Nimble HF40 array Data is constantly being ejected from the Nimble array's First In First Out cache What should you recommend?

Question72: You need to create a dynamic bridge-aggregation group on a FlexFabric switch to ensure the ports are automatically configured with the applicable bridge-aggregation interface configuration
Drag the steps on the left Into their appropriate order in the answer area on the right.

Question73: A customer considers a new HPE ProLiant DL380 Gen10 as a hardware platform for their application and requires maximum physical security.
For each security-related server components, identify whether it needs to be ordered separately, or whether it is included as part of the server solution.

Question74: Which storage array feature records only changes made to the base volume and keeps an earlier state of the original volume?

Question75: Match the HPE Tool with its use case. Select all that apply.

Question76: For which virtualization management products does HPE OneView offer integration plug-ins1? (Select two.)

Question77: A customer requires five HPE ProLiant servers that will be mounted in a rack and shipped from site to site All servers must be online within an hour of site arrival
Which feature will ensure that the servers win be available to the business if travel motion has damaged a DIMM?

Question78: A customer needs a new VMware environment for a critical stock trading application and will need high performance compute and low latency storage.
Identify the correct component configurations on the left and drag them to the answer area on the right.
(Choose two.)

Question79: A security client needs a surveillance solution to support 239 Cameras. They expect to generate 2PB of data and require a 10Gb network infrastructure in a single rack.
Which solution should you recommend to meet the customer requirements?

Question80: A customer needs a new environment to support an ERP system. The sizing information you received shows the following requirements:
* 3 servers with dual AMD processors, 256GB RAM, and 10Gb network connectivity
* 10TB of high performance shared storage
* Cloud-based performance monitoring and analytics
The customer prefers rack mounted equipment.
Identify the components that will meet the customer requirements, then drag the correct components on the left to their appropriate location in the environment on the right.

Question81: You need to review a warning on a Nimble storage array.
Click on the menu option that displays this information.

Question82: Refer to the exhibit.

The information shown is displayed for a Nimble array you are installing. The customer's administrator has asked you for the speed at which the Nimble ports are connecting to their SAN switches, and you have run the command shown to determine the number of gigabits per second used by this port connection.
What speed does the exhibit indicate is in use?

Question83: Refer to the exhibit.

A customer needs a server with four 10Gb network adapters. They need it to be configured for the best possible network throughput.
Given the BOM in the exhibit, what do you need to add to this server to meet the customer requirement?

Question84: Match each HPE solution to its optimal use case.

Question85: A client complains about systems reliability issues caused by their staff's inability to identify the root cause of failures. The client's lead administrator wants to automatically send data from HPE OneView to additional listeners in the network.
What should you configure in HPE OneView to enable the external monitoring of the managed devices?

Question86: What does StoreOnce use to allow independent software vendors (ISV) to be aware of the HPE StoreOnce Backup system and its capabilities without emulation?

Question87: Match each characteristic to the correct storage type.

Question88: A Nimble storage customer is experiencing rapid data growth and needs to scale their storage resources.
Which action should the customer take first?

Question89: Place the components on the left in the correct order on the right for the recommended power-up sequence.

Question90: What is the correct cable type to use when connecting a server to a switch using 10 Gbps Short Range (SR) SFP+ optical connections?

Question91: When configuring a single ProLiant Gen10 server, which embedded tool can be used to deploy a reliable and consistent configuration?

Question92: A customer Has a data center with third-party routers and firewalls You are designing a new data center network switch architecture consisting of FlexFabric switching for the data network and ArubaOS-Switch switching for the out-of-band management network.
The customer needs a network management platform with the capabilities to manage and monitor the entire environment
Which management platform meets the customer requirements?

Question93: A customer requests a quote for an HPE storage solution that meets these requirements
* fully redundant dual-controller storage array with no single points of failure
* 1 Gb or 10 Gb ISCSI connectivity
* at least four host-facing ISCSI ports
* capable of expanding usable capacity in small increments of one-to-two disks Which HPE storage solution should be proposed?

Question94: A customer is considering an upgrade of their networking infrastructure with HPE FlexFabric 5940 series switch.
Match the fan tray option with the airflow direction.

Question95: Match the Networking Product Family to the appropriate use case:

Question96: Which web service uses baste CRUD operations performed on resources using HTTP Post, Get. Put. Delete, and Patch?

Question97: A customer is expanding from local storage to a SAN environment for the firt time. They plan to future proof their environment with a 16 Gb Fibre Channel. They also want to allow for future I/O expansion with new servers.
Identify the correct server and storage to meet the customer requirements.

Question98: A customer needs to integrate a new digital video surveillance solution into their existing environment and available network ports. The solution needs to include redundant hypervisor servers and a redundant SAN with a shared Fibre Channel attached storage array.
You plan to propose the following configuration:
2 HPE DL380 Gen10 servers with dual processors, 384 GB of memory, dual port 10 Gb NIC, and High Performance Fan Kit
1 HPE MSA 2050 Dual Controller Storage Array with 24x 1.8 TB 10 K SAS drives and 96x 7.2K NL drives
4 VMware vSphere Standard licenses
1 VMware vCenter Server Foundation licenses
5 year 24x7x4 support for all equipment
What must be added to the configuration to provide a complete solution? (Choose two.)

Question99: A customer considers a new HPE ProLiant DL380 Gen10 as a hardware platform for their application and requires maximum physical security.
For each security-related server components, identify whether it needs to be ordered separately, or whether it is included as part of the server solution.

Question100: A customer is considering an upgrade of their networking infrastructure with HPE FlexFabric 5940 series switch.
Match the fan tray option with the airflow direction.

Question101: A customer has requested that you provide them with an architecture and bill-of-materials for a stack of top-ofrack switches. The customer has 34 HPE DL360 servers in the rack, each with four 1GBASE-T Ethernet ports which need to be connected to the network.
The customer is upgrading 50% of the 1GBASE-T Ethernet ports on the servers to 10GBASE-T Ethernet ports and needs the switching to support the upgraded servers. They are opposed to a chassis switch, and want to keep their number of managed devices on the network to a minimum.
Which architecture meets the customer requirements?

Question102: You are installing multiple components into an existing server.
Which HPE resource can you use to verify the compatibility of the server hardware options with the server? (Select two.)

Question103: An HPE customer wants to perform is simplified update of firmware and drivers among their 100 HPE Gen9 and Gen10 racked servers.
Which HPE software tool should the customer use to minimize the time required to perform this activity.

Question104: Match the speed and protocol with the appropriate component.

Question105: Match the stacking technology to the switch series.

Question106: Match each adapter to its characteristic.

Question107: Match each ProLiant solution to its ideal use case

Question108: Refer to the exhibit.

A customer has been using VEEAM and the HPE StoreOnce 3620 shown in the exhibit to backup their environment. The customer's legal team has asked to double their retention times for all backup sets, and they are starting to run out of space on the StoreOnce.
Which options could you recommend that the customer add to their existing configuration to accommodate the new requirement? (Select two. Each option represents a separate solution.)

Question109: What should you configure to limit the scope of broadcast domains in an Ethernet network?

Question110: You are validating a configuration prior to quoting it for the customer. You plan to propose the following configuration:
Two HPE DL380 Gen10 servers with dual processors, 256GB of memory, dual 10Gb NICs, SN1100Q
16Gb dual port FC HBA, dual 800W power supplies, and high temperature fan kit HPE Nimble HF20H with 11TB storage, 960GB of cache, dual port 10GbE NIC, and 16Gb dual port FC adapter kit Two SN3000B FC Switches Which tool should you use to verify firmware compatibility between the storage and server components in this proposed solution?

Question111: Drag the correct protocols from the left to their appropriate area on the topology.

Question112: An HPE customer wants to perform is simplified update of firmware and drivers among their 100 HPE Gen9 and Gen10 racked servers.
Which HPE software tool should the customer use to minimize the time required to perform this activity.

Question113: Match each HPE solution to its optimal use case.

Question114: A customer needs a solution for a rack of servers. They need connectivity for 14 HPE DL380 servers, which each have two 10-GBASE-T Ethernet ports, and 10 HPE DL360 servers, which have two 10GBASE-X SFP+ Ethernet ports.
They need switch redundancy for each server and want to connect all servers to the same switch stack. The client also needs a 400 Gb backbone connection to the data center core switch from the solution you are creating.
Which architecture meets the customer requirements?

Question115: A solution integrator is installing new equipment to the rack.
Click the recommended location for HPE R/T3000 Extended Runtime Module.
Hot Area:

Question116: Which hardware and software components make up a Nimble dHCI infrastructure?

Question117: You configured a port on an HPE FiexFabric 5900 series switch that is connected to a VMware ESXi server to support multiple VLANs interface Ten-GigabitEthernet 1/0/11 description server ESXiOl-ethl port link-type trunk port trunk permit vlan 50 port trunk permit vlan 2 port trunk pvid vlan 50 Given the configuration above, what should happen to any untagged traffic coming from the VMware ESXI host?

Question118: You need to review a warning on a Nimble storage array.
Click on the menu option that displays this information.

Question119: A security client needs a surveillance solution to support 239 Cameras. They expect to generate 2PB of data and require a 10Gb network infrastructure in a single rack.
Which solution should you recommend to meet the customer requirements?

Question120: A customer plans to purchase five HPE DL380 Gb 2-port 530SFP Ethernet Adapters. The customer's network administrator has Installed a top of rack 10 GbE switch capable of supporting copper and optical connections.
The customer is already over budget and needs to keep costs down.
Which option should you recommend Tor connecting to the switch?

Question121: Match each HPE solution to its optimal use case.

Question122: Match the industry trend with its use case.

Question123: A customer needs a server memory subsystem that meets the following requirements:
approaches the speed of traditional DRAM
ensures high capacity, high performance, and ongoing data safety in case of a power failure Which HPE memory feature meets the customer needs?

Question124: Refer to the exhibit.

A customer needs a server with four 10Gb network adapters. They need it to be configured for the best possible network throughput.
Given the BOM in the exhibit, what do you need to add to this server to meet the customer requirement?

Question125: A customer needs to add storage capacity to a host In a remote branch office. They have limited IT resources, so the solution requires ease of integration at a low price point
Which HPE Storage family best meets these needs?

Question126: You are validating a configuration prior to quoting it for the customer. You plan to propose the following configuration:
Two HPE DL380 Gen10 servers with dual processors, 256GB of memory, dual 10Gb NICs, SN1100Q 16Gb dual port FC HBA, dual 800W power supplies, and high temperature fan kit HPE Nimble HF20H with 11TB storage, 960GB of cache, dual port 10GbE NIC, and 16Gb dual port FC adapter kit Two SN3000B FC Switches Which tool should you use to verify firmware compatibility between the storage and server components in this proposed solution?

Question127: Exhibit:

Which HPE ProLiant Server meets the customer's requirements?

Question128: Match each HPE solution to its optimal use case.

Question129: Read the question, and then refer to the exhibit.
<Switch-A>display int Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: UP Line protocol state: UP IP packet frame type: Ethernet II, hardware address: d894-03fb-793d Description: Ten-GigabitEthernet1/0/1 Interface Bandwidth: 10000000 kbps Loopback is not set Media type is stack wire, port hardware type is STACK SFP_PLUS 10Gbps-speed mode, full-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled Maximum frame length: 10000 Allow jumbo frames to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio: 100% PVID: 1 MDI type: Automdix Port link-type: Trunk VLAN Passing: 10 VLAN permitted: 10 Trunk port encapsulation: IEEE 802.1q Port priority: 0 <SNIP>
An administrator connected a hypervisor to interface Ten-Gigabit Ethernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. These VLANs are configured to be tagged on the hypervisor.
The administrator found that all the virtual machines within VLAN 20 can communicate with each other, but not to any resource on VLAN 20 outside the hypervisor.
What must you do to resolve this issue?

Question130: A customer has two HPE ProLiant Gen10 servers. They both require firmware installation.
Which HPE tool should you recommend to performing this task?

Question131: An administrator has two switches connected with a single link. The administrator observes that, during hours of peak activity, the storage traffic tends to consume the link. The link is shared with other types of traffic that is time sensitive.
What technology can the administrator use to help alleviate the situation while they are working towards a long-term solution?

Question132: A customer requires a management solution that will provide email notifications if hardware errors occur on their servers.
Which management solution provides this functionality?

Question133: Refer to the exhibit.

You are designing a new Nimble AF40 for your customer. The array will be added into an existing Nimble HF60 environment connected with SN6000B switches. You have created the configuration shown in the exhibit and noticed an error What should you change in your configuration to ensure it meets the customer requirements?

Question134: A customer is considering an upgrade of their networking infrastructure with HPE FlexFabric 5940 series switch.
Match the fan tray option with the airflow direction.

Question135: A customer requires a high level of network bandwidth and reliability. You are installing a pair of HPE switches that can provide redundancy with multiple connections between them for high availability and faster throughput.
Which technology should you configure on the switches to enable the capability the customer requires?

Question136: A customer requires a management solution that will provide email notifications if hardware errors occur on their servers.
Which management solution provides this functionality?

Question137: Drag the correct protocols from the left to their appropriate area on the topology.

Question138: Which HPE remote management tool offers simplified warranty and contract case management?

Question139: Match each HPE solution to its corresponding technology usage.

Question140: Match the HPE Tool with its use case. Select all that apply.

Question141: A customer has requested that you provide them with an architecture and bill-of-materials for a stack of top-of- rack switches. The customer has 34 HPE DL360 servers in the rack, each with four 1GBASE-T Ethernet ports which need to be connected to the network.
The customer is upgrading 50% of the 1GBASE-T Ethernet ports on the servers to 10GBASE-T Ethernet ports and needs the switching to support the upgraded servers. They are opposed to a chassis switch, and want to keep the number of managed devices on the network to a minimum.
Which architecture meets the customer requirements?

Question142: Which factors are used to determine RAM configuration maximum memory capacity? (Choose two.)

Question143: Which protocol verifies that the ports in common between two switches have compatible settings and removes the likelihood of a misconfigured aggregated link?

Question144: A customer needs a shared storage solution for a virtualization platform that will host a database application.
The customer is considering an HPE Nimble array.
Which feature would lead you to propose an HPE Nimble AF40 over an HPE 3PAR All Flash array?

Question145: You are installing an HPE ProLiant server that has a shared network port for iLO and NIC teaming. You need to ensure that you can still access iLO after configuring the NIC team.
Which teaming technology should you configure?

Question146: A solution Integrator is installing new equipment to the rack Click the recommended location area for R3000 Gen5 UPS.

Question147: A customer has the following requirements:
two or more 10Gb SFP+ uplinks
downlink ports capable of 1Gb or 10Gb operation over CAT6a or CAT7 cables
24 downlink ports Which HPE tool would you use to help choose an HPE network solution that meets the customer requirements?

Question148: A customer needs a single, dual-processor server for an Enterprise Resource Planning solution for a single office. The customer application uses a mix of HDDs and SSDs and up to 3TB of RAM.
Which HPE Solution should you propose?

Question149: Match the HPE Tool with its use case. Select all that apply.

Question150: You need to review a warning on a Nimble storage array.
Click on the menu option that displays this information.

Question151: A customer wants to decrease problem resolution time on their HPE infrastructure.
Why would this customer benefit from Insight Remote Support?

Question152: A customer is considering an upgrade of their networking infrastructure with HPE FlexFabric 5940 series switch.
Match the fan tray option with the airflow direction.

Question153: A customer plans to use HPE ProLiant servers for line-of-business applications. They want to configure the servers to increase reliability.
Which workload profile should the customer use?

Question154: Match the HPE Tool with its use case. Select all that apply.

One Config Advanced (OCA) - Estimate the power and cooling requirements and weight for a rack of equipment Single Point of Connectivity Knowledge (SPOCK) - Check compatibility of storage components Products and solutions Now (PSNow) - Download a technical presentation for a DL380 Gen10

Question155: A customer requires a management solution that will provide email notifications if hardware errors occur on their servers.
Which management solution provides this functionality?

Question156: Which solution should you recommend to a customer for basic file and print services?

Question157: A customer requires a storage platform for their department data. They have a limited budget and will be sharing files among their Microsoft Windows environment.
Which HPE storage platform meets the customer's needs?

Question158: You are discussing storage types with a customer that is configuring their NAS solution. The company's application developers use user-generated media and image files.
For which type of data should this customer use file storage?

Question159: You are installing an HPE Nimble HF20 into a customer's existing rack.
Prior to installation, what should you consider?

Question160: Match the storage technology to the storage type.

Question161: You are configuring an MSA 2052 for one of your customers in OCA.
Click on either one of the two places on the Bill of Materials screen that will enable you to verify the configuration and get details on any errors.

Question162: Match each workload profile description with the corresponding profile. (Select all that apply.)

Question163: A customer has a VMware environment with HPE ProLiant servers and Nimble storage. They have been using a Windows VM to provide file services for their employees.
The customer is experiencing performance issues with the solution due to memory constraints on the virtual environment.
What could be added to the existing environment that will provide dedicated file services with better performance that would still utilize the existing storage and backup solutions?

Question164: A customer needs a shared storage solution for a virtualization platform that will host a database application.
The customer is considering an HPE Nimble array.
Which feature would lead you to propose an HPE Nimble AF40 over an HPE 3PAR All Flash array?

Question165: An administrator has two switches connected with a single link. The administrator observes that, during hours of peak activity, the storage traffic tends to consume the link. The link is shared with other types of traffic that is time sensitive.
What technology can the administrator use to help alleviate the situation while they are working towards a long-term solution?

Question166: A customer needs to share files among their Linux-based servers in a cost effective manner. The customer is concerned about compatibility with the servers in their environment that run Windows.
Which HPE StoreEasy feature addresses the customer's concerns?

Question167: You are installing new drives into the internal cage of a HPE ProLiant DL380 server.
How is the drive device number set?

Question168: A customer needs a new VMware environment for a critical stock trading application and will need high performance compute and low latency storage.
Identify the correct component configurations on the left and drag them to the answer area on the right. (Choose two.)

Question169: Match each workload profile description with the corresponding profile. (Select all that apply.)

Question170: A security client needs a surveillance solution to support 239 Cameras. They expect to generate 2PB of data and require a 10Gb network infrastructure in a single rack.
Which solution should you recommend to meet the customer requirements?

Question171: Match each adapter to its characteristic.

Question172: A customer's backup administrator is responsible for maintaining and coordinating all nightly backups of the company's 30 servers.
Which HPE product can be used as the primary interface to orchestrate all backup targets and Catalyst copy functions?

Question173: Which disk technology provides the lowest latency for performing random reads?

Question174: A customer needs a single, dual-processor server for an Enterprise Resource Planning solution for a single office. The customer application uses a mix of HDDs and SSDs and up to 3TB of RAM.
Which HPE Solution should you propose?

Question175: Read the question, and then refer to the exhibit.
<Switch-A>display interface Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: Administratively DOWN Line protocol state: DOWN IP packet frame type: Ethernet II, hardware address: d894-03fb-793d Description: Ten-GigabitEthernet1/0/1 Interface Bandwidth: 10000000 kbps Loopback is not set Media type is stack wire, port hardware type is STACK_SFP_PLUS Unknown-speed mode, unknown-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled Maximum frame length: 10000 Allow jumbo frames to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio: 100% PVID: 1 MDI type: Automdix Port link-type: Trunk VLAN Passing: 10, 20 VLAN permitted: 10, 20 Trunk port encapsulation: IEEE 802.1q Port priority: 0 Last link flapping: 0 hours 0 minutes 18 seconds Last clearing of counters: Never Peak input rate: 78 bytes/sec, at 2011-03-31 04:55:57 Peak output rate: 15 bytes/sec, at 2011-03-30 23:00:57 Last 300 second input: 0 packets/sec 67 bytes/sec - % Last 300 second output: 0 packets/sec 14 bytes/sec - % Input (total): 62670 packets, 8565340 bytes 0 unicasts, 0 broadcasts, 62670 multicasts, 0 pauses Input (normal): 62670 packets, - bytes 0 unicasts, 0 broadcasts, 62670 multicasts, 0 pauses Input: 0 input errors, 0 runts, 0 giants, 0 throttles 0 CRC, 0 frame, - overruns, 0 aborts - ignored, - parity errors Output (total): 3707 packets, 1294835 bytes 0 unicasts, 0 broadcasts, 3707 multicasts, 0 pauses Output (normal): 3707 packets, - bytes 0 unicasts, 0 broadcasts, 3707 multicasts, 0 pauses Output: 0 output errors, - underruns, - buffer failures 0 aborts, 0 deferred, 0 collisions, 0 late collisions 0 lost carrier, - no carrier A customer added a new switch to their network. They connected it using interface Ten-GigabitEthernet 1/0/1. They are using VLAN 10 and 20 for the devices in their network.
The new switch was fully operational. Then, the customer experienced a power failure later that day and could not reach any device on the new switch after the power returned.
From the output in the exhibit, would could be the issue?

Question176: Refer to the exhibit.

A customer has been using VEEAM and the HPE StoreOnce 3620 shown in the exhibit to backup their environment. The customer's legal team has asked to double their retention times for all backup sets, and they are starting to run out of space on the StoreOnce.
Which options could you recommend that the customer add to their existing configuration to accommodate the new requirement? (Select two. Each option represents a separate solution.)

Question177: A customer wants to install an HPE Proliant server that has a single dual port 10Gb NIC.
Which NIC feature should you introduce to allow each 10Gb port to be seen as four individual adapters in the operating system?

Question178: You are working in a data center with multiple servers and need to update the iLO 5 user names and passwords on a regular basis.
Which tool enables you to streamline and automate this process?

Question179: A customer's environment includes virtual machines and containers. They need an on-premises platform that allows them to easily and efficiently deploy cloud-native applications at rack-scale.
Which HPE solution meets the customer requirements?

Question180: A customer has requested that you provide them with an architecture and bill-of-materials for a stack of top-of- rack switches. The customer has 34 HPE DL360 servers in the rack, each with four 1GBASE-T Ethernet ports which need to be connected to the network.
The customer is upgrading 50% of the 1GBASE-T Ethernet ports on the servers to 10GBASE-T Ethernet ports and needs the switching to support the upgraded servers. They are opposed to a chassis switch, and want to keep thei number of managed devices on the network to a minimum.
Which architecture meets the customer requirements?

Question181: Which series of internal checks will an HPE ProLiant server use to validate that the base hardware components are working correctly before booting the operating system?

Question182: A customer needs to consolidate software, hardware, and backup in a single integrated solution to reduce the cost and complexity of their IT environment
Which solution meets the customer needs?

Question183: A customer needs NFS access on a fiber channel array.
What must be included in the solution to meet this requirement?

Question184: Which HPE solution brings together CPU, Memory, and Disk with an unpredictable workload into a single management infrastructure?

Question185: A customer needs a new VMware environment for a critical stock trading application and will need high performance compute and low latency storage.
Identify the correct component configurations on the left and drag them to the answer area on the right. (Choose two.)

Question186: Match each characteristic to the correct storage type.

Question187: Which backup targets are available from an HPE StoreOnce backup system? (Choose two.)

Question188: Match each HPE solution to its optimal use case.

Question189: A customer requires an entry-level, all-flash system with predictable performance at the lowest possible price.
They have performance-sensitive workloads that require speed and efficiency.
Which HPE storage system needs the customer's requirements?

Question190: Refer to the exhibit.
Drag the correct protocols from the left to the appropriate area on the topology on the right.

Question191: Refer to the exhibit.

A customer purchased a server/storage environment shown in the exhibit with 1 Gb networking connectivity.
The customer is now experiencing performance issues.
Identify the correct components to upgade the network connections and improve performance on the left. Then drag those components to the answer area on the right. (Choose three.)

Question192: A customer has two HPE ProLiant Gen10 servers. They both require firmware installation.
Which HPE tool should you recommend for performing this task?

Question193: A local state college is implementing a new VDI cluster to support computer and testing labs. They have the following requirements:
* Three VMware ESXi Hosts, each with one AMD processor, 1 TB of RAM, 16 Gbps FC Dual Port HBA.
* HPE Nimble AF20 with 17 TB usable capacity.
* Integration into an existing HPE FlexFabric 5710 and HPE SN3000B Fibre Channel SAN switches.
* The solution must fit in 7U of rack space. If the customer needs more capacity in the future, they will use scale-out growth.
Which server model should you recommend to this client?

Question194: You are installing a combined server and storage solution at a customer location. What must you keep in mind regarding the typical requirements for the location? (Choose two.)

Question195: Refer to the exhibit.

An administrator connected a hypervisor to interface Ten-GigabitEthernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. VLAN 10 is configured to be tagged, and VLAN 20 is configured to be untagged on the hypervisor.
The administrator found that all the virtual machines in VLAN 20 can communicate with each other, but not with any virtual machines on VLAN 20 external to the hypervisor.
Given the output in the exhibit, what should you do to resolve the issue?

Question196: Which disk technology provides the lowest latency for performing random reads?

Question197: A customer requires an entry-level, all-flash storage system with predictable performance at the lowest possible price. They have performance-sensitive workloads that require speed and efficiency.
Which HPE storage system meets the customer's requirements?

Question198: A customer needs a solution for a rack of servers. They need connectivity for 14 HPE DL380 servers, which each have two 10-GBASE-T Ethernet ports, and 10 HPE DL360 servers, which have two 10GBASE-X SFP+ Ethernet ports.
They need switch redundancy for each server and want to connect all servers to the same switch stack. The client also needs a 400 Gb backbone connection to the data center core switch from the solution you are creating.
Which architecture meets the customer requirements?

Question199: Match the stacking technology to the switch series.

Question200: A customer has a small branch office that requires a tower-based server solution. The customer runs office-based applications and wants lights-out management capability.
Which HPE server family meets the customer's needs?

Question201: A customer needs an HPE Nimble storage solution with 100TB capacity. They want to be able to add more disk capacity if needed Which HPE tool can help you validate the proposed storage solution and that it is supported by HPE?

Question202: A customer is expanding from local storage to a SAN environment for the firt time. They plan to future proof their environment with a 16 Gb Fibre Channel. They also want to allow for future I/O expansion with new servers.
Identify the correct server and storage to meet the customer requirements.

Question203: A customer wants an HPE solution to expand a Big Data platform.
The company is outgrowing its current setup and expects to consume 1 PB of data in a few months and up to 2 PB of data within a year.
Which HPE server platform is best suited for this use case?

Question204: A customer wants to optimize the performance or its storage array by moving data residing in one class or disks to a more appropriate class of disks based on data access patterns without manual intervention.
Which HPE storage techno logy/feature will meet the customer requirement when the data is stored on an HPE
3PAR storage?

Question205: Match each HPE solution to its corresponding technology usage.

Question206: A customer has an existing environment that contains a mixture of network vendors. The customer wants to manage all devices using a single interface.
What should the customer use to manage the devices?

Question207: A customer is experiencing read cache hit ratios well below 80 percent on an HPE Nimble HF40 array Data is constantly being ejected from the Nimble array's First In First Out cache
What should you recommend?

Question208: A customer has an ESXi server in a branch office They need to perform backups locally. The local backups must be replicated to the main data center with built-in deduplication What should the customer install at the branch office?

Question209: A customer is planning an upgrade in their data center. The customer needs to deploy on bare-metal and virtual servers easily through a common interface. In addition, they have expressed an interest in software-defined storage.\ Which HPE compute platform should you suggest?

Question210: A customer needs a virtual desktop infrastructure environment to quickly deploy new desktop images to more than 70 onsite contractors. They plan to use HPE ProLiant DL360 Gen10 servers running VMware ESXi connected to a shared storage device. The customer requires deduplication because they are concerned about the required storage capacity for the full clone images.
Which storage device would best address their concerns?

Question211: Refer to the exhibit.

You are asked to review a server configuration for a customer before it is quoted. The server will be used in a business-critical environment and high availability is required. The server configuration is shown in the exhibit.
What should be added to the configuration to ensure availability?

Question212: What is the most important difference between an HPE ProLiant DL380 Gen10 server and an HPE ProLiant DL385 Gen10 server?

Question213: A customer has two HPE ProLiant Gen10 servers. They both require firmware installation.
Which HPE tool should you recommend to performing this task?

Question214: A customer plans to back up a file server that holds 2 TB of data. The customer wants to upgrade their network infrastructure to support backup and to implement a datacenter network solution.
Which solutions would HPE recommend to meet the customer needs? (Choose two.)

Question215: You are installing an HPE StoreOnce backup system in a customer's environment. They need a simple and cost-effective method to centralize and automate the backup of multiple servers (file, virtualization, database).
They also need the ability to integrate with an existing third-party backup software.
How must you configure the StoreOnce system to meet the customer's requirements?

Question216: An HPE customer wants to perform is simplified update of firmware and drivers among their 100 HPE Gen9 and Gen10 racked servers.
Which HPE software tool should the customer use to minimize the time required to perform this activity.

Question217: A customer needs a solution that supports rapid provisioning changes on physical bare-metal servers and on a virtualization hypervisor. They are considering migrating to a new solution that supports software-defined storage.
Which HPE compute platform should the customer implement?

Question218: Match the customer requirement to the appropriate HPE storage solution.

Question219: A customer is moving a server from a co-location facility back into their existing data center to comply with new internal policies on data management Due to budget constraints, the customer cannot purchase any additional switches and will need to use an existing end-of-row design with HPE FlexFabric switches While the server will be installed six racks away from the switches, the total cable run with cable management Is expected to be 35 m.
Which component should be selected when designing the 10 Gbps connectivity option for the server?

Question220: A customer environment is being managed and monitored with HPE OneView. A review of the OneView log shows that there have been several trap storm events.
Which series of events must take place for OneView to insert a Trap Storm event entry into the log of system events?

Question221: A customer needs to share files among their Microsoft Windows servers cost-effectively and requires disaster support.
Which native StoreEasy features win address the customer's need? (select two)
recovery

Question222: Read the question, and then refer to the exhibit.
display interface Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: Administratively DOWN Line protocol state: DOWN IP packet frame type: Ethernet II, hardware address: d894-03fb-793d Description: Ten- GigabitEthernet1/0/1 Interface Bandwidth: 10000000 kbps Loopback is not set Media type is stack wire, port hardware type is STACK_SFP_PLUS Unknown-speed mode, unknown-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled Maximum frame length: 10000 Allow jumbo frames to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio: 100% PVID: 1 MDI type: Automdix Port link-type: Trunk VLAN Passing:
10, 20 VLAN permitted: 10, 20 Trunk port encapsulation: IEEE 802.1q Port priority: 0 Last link flapping: 0 hours 0 minutes 18 seconds Last clearing of counters: Never Peak input rate: 78 bytes/sec, at 2011-03-31 04:55:57 Peak output rate: 15 bytes/sec, at 2011-03-30 23:00:57 Last 300 second input: 0 packets/sec
67 bytes/sec - % Last 300 second output: 0 packets/sec 14 bytes/sec - % Input (total): 62670 packets, 8565340 bytes 0 unicasts, 0 broadcasts, 62670 multicasts,
0 pauses Input (normal): 62670 packets, - bytes 0 unicasts, 0 broadcasts, 62670 multicasts, 0 pauses Input: 0 input errors, 0 runts, 0 giants, 0 throttles 0 CRC,
0 frame, - overruns, 0 aborts - ignored, - parity errors Output (total): 3707 packets, 1294835 bytes 0 unicasts, 0 broadcasts, 3707 multicasts, 0 pauses Output (normal): 3707 packets, - bytes 0 unicasts, 0 broadcasts, 3707 multicasts, 0 pauses Output: 0 output errors, - underruns, - buffer failures 0 aborts, 0 deferred, 0 collisions, 0 late collisions 0 lost carrier, - no carrier A customer added a new switch to their network. They connected it using interface Ten-GigabitEthernet 1/0/1.
They are using VLAN 10 and 20 for the devices in their network.
The new switch was fully operational. Then, the customer experienced a power failure later that day and could not reach any device on the new switch after the power returned.
From the output in the exhibit, would could be the issue?

Question223: You are troubleshooting server issues and need to troubleshoot when online and offline.
Which HPE tool should you use?

Question224: Match each workload profile description with the corresponding profile. (Select all that apply.)

Question225: Which storage array feature records only changes made to the base volume and keeps an earlier state of the original volume?

Question226: You are installing HPE ProLiant servers into a rack that will be fully loaded. You also need to install four power distribution units (PDUs) in the rack.
How should you install the PDUs to maximize power distribution and space efficiency?

Question227: Which information is contained in the Array Diagnostic Report? (Choose two.)

Question228: You are configuring an MSA 2052 for one of your customers in OCA.
Click on either one of the two places on the Bill of Materials screen that will enable you to verify the configuration and get details on any errors.

Question229: Match each ProLiant solution to its ideal use case

Question230: What is the correct cable type to use when connecting a server to a switch using 10 Gbps Short Range (SR) SFP+ optical connections?

Question231: A customer needs a single, dual-processor server for an Enterprise Resource Planning solution for a single office. The customer application uses a mix of HDDs and SSDs and up to 3TB of RAM.
Which HPE Solution should you propose?

Question232: Which feature in a block storage array eliminates redundant data through the process of using indexes that refer to the original set of data?

Question233: A customer has a new virtual environment. They selected HPE servers for the environment in order to achieve better performance for their applications.
Which HPE feature enables the customer to achieve this server performance improvement?

Question234: A customer wants to install an HPE Proliant server that has a single dual port 10Gb NIC.
Which NIC feature should you introduce to allow each 10Gb port to be seen as four individual adapters in the operating system?

Question235: A solution Integrator is installing new equipment to the rack Click the recommended location area for R3000 Gen5 UPS.

Question236: Which statement is true regarding configuring memory in an HPE ProLiant server?

Question237: A customer needs to update firmware and perform diagnostic tests on various components of a HPE ProLiant server.
Which utility should they use?

Question238: An HPE customer wants to perform is simplified update of firmware and drivers among their 100 HPE Gen9 and Gen10 racked servers.
Which HPE software tool should the customer use to minimize the time required to perform this activity.

Question239: Refer to the exhibit.

You are asked to review a server configuration for a customer before it is quoted. The server will be used in a business-critical environment and high availability is required. The server configuration is shown in the exhibit.
What should be added to the configuration to ensure availability?

Question240: You are working on a server, and you notice that the blue UID light on the server is flashing slowly.
What does this indicate?

Question241: What does StoreOnce use to allow independent software vendors (ISV) to be aware of the HPE StoreOnce Backup system and its capabilities without emulation?

Question242: Match each adapter to its characteristic.

Question243: A customer needs to verify inbound packet statistics for interface Ten-GigabitEthernet 1/0/10 on an HPE FlexFabric 5900 series switch used by an iSCSI storage array.
Which command can be used in the CLI to perform this operation?

Question244: A customer is planning to deploy a new Top of Rack solution. They plan to use a stacking technology that meets the following requirements:
Support for Multi Chassis Link Aggregation in an active-active mode.
The control plane must not be a single point of failure.
Rapid Fail-over.
Unified Management.
They require a maximum of two switches per stack.
Which stacking technology meets the customer's requirements?

Question245: You are configuring an MSA 2052 for one of your customers in OCA.
Click on either one of the two places on the Bill of Materials screen that will enable you to verify the configuration and get details on any errors.

Question246: Match each ProLiant solution to its ideal use case

Question247: Match the storage technology to the storage type.

Question248: Which HPE Proliant server should you recommend for a home office environment where the server will be located in the same office as the user?

Question249: A customer needs a new environment to support an ERP system. The sizing information you received shows the following requirements:
3 servers with dual AMD processors, 256GB RAM, and 10Gb network connectivity
10TB of high performance shared storage
Cloud-based performance monitoring and analytics
The customer prefers rack mounted equipment.
Identify the components that will meet the customer requirements, then drag the correct components on the left to their appropriate location in the environment on the right.

Question250: Indicate whether each management feature manages or monitors a single system or multiple systems.

Question251: Given the solution shown in the exhibit, which adapter is required in the server to facilitate connective in Block 1

Question252: Match each workload profile description with the corresponding profile. (Select all that apply.)

Question253: Refer to the exhibit.

You are validating a Nimble HF40 configuration created in OCA, and you receive an error when you run a CLIC check.
Which Nimble component needs to be added to the configuration to complete the solution?

Question254: Match each characteristic to the correct storage type.

Question255: A solution integrator is installing new equipment to the rack.
Click the recommended location for HPE R/T3000 Extended Runtime Module.
Hot Area:

Question256: You are installing multiple components into an existing server.
Which HPE resource can you use to verify the compatibility of the server hardware options with the server?
(Select two.)

Question257: Match the storage technology to the storage type.

Question258: A customer is considering an upgrade of their network, which connects 10 servers. The customer has a converged data center networking architecture with Layer 2 and Layer 3 functionality. Which HPE product family will meet this customer's needs?

Question259: A customer needs to deploy an application on a newly-installed HPE ProLiant server, but they report that the server is not online. They call you for remote support. The IP address on the production network cannot be reached. You are evaluating the probable root causes of this issue.
According to the troubleshooting methodology, what are next two steps? (Select two)

Question260: Match each characteristic to the appropriate RAID level.

Question261: Place the components on the left in the correct order on the right for the recommended power-up sequence.

Question262: You are configuring an MSA 2052 for one of your customers in OCA.
Click on either one of the two places on the Bill of Materials screen that will enable you to verify the configuration and get details on any errors.

Question263: An administrator deployed a new FlexFabric switch Into the environment and wants to collect baseline information from the switch The administrator wants to be able to use this in case there is any question from support should the administrator open a case.
Which command can the administrator use to collect support information from the switch?